You are here: Home >Products center > Ore dressing machine > Flotation Machine
Ore dressing machine

Flotation Machine


The flotation cell is various in types in the mining industry, and different flotation separation methods should be chosen according to the specific separation need. Other than being used for separating metal, non-metallic mineral and energy minerals, flotation separation methods can also be widely used in the purification of plant effluent.
Features:
    • Small footprint
    • Easy maintenance
    • Save power

1. Introduction to flotation machine

It refers to the flotation plant that completes the flotation process. In the flotation machine, through the mixing and aerating process, some ore grain that in the ore pulp which is added to the medicament will selectively float on the bubble; the ore grain that floating on the pulp surface will be discharging and forming foam products and the rest will be retained in pulp in order to achieve the purpose of the mineral separation. The most commonly used machine is mechanical flotation machine.

2. Working principle:

The flotation machine is mainly used for sorting copper, zinc, lead, nickel, gold and other non-ferrous metals. It can also be used for roughing and selecting black metal and non-metallic. The impeller of the flotation machine is driven by the V-belt motor, and then generates centrifugal effect to form negative pressure. On one hand, it absorb sufficient air to mix with the slurry; on the other hand, by stirring the slurry, it will mix the slurry with medicaments and refine the foam to cohere the mineral with foam. The mineral will float to the pulp surface to form mineralized foam. Adjusting the gate height and controlling the liquid level will scrape off the useful foam.

Flotation Machine

Flotation Machine

3. Technological parameters

Model KYF-1 KYF-2 KYF-3 KYF-4 KYF-8 KYF-16 KYF-24 KYF-38
Chute Dimensions Length(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Width(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Height(mm) 1100 1250 1400 1500 1950 2400 2900 3400
Single  effective Weight(t) 1.1 1.5 1.9 2.3 3.6 5.9 9.9 15.1
Effective cubage(m³) 1 2 3 4 8 16 24 38
Production Capacity calculated by slurry volume(m³/min) 0.2-1 0.4-2 0.6-3 1.2-4 3—8 4—16 4—24 10—38
Main shaft motor Model Y132M1-6 Y160M2-8 Y160L-8 Y180L-8 Y200L-8 Y250M-8 Y250M-8 Y280S-8
Power(kw) 4 5.5 7.5 11 15 30 30 37
Rotate speed(r/min) 960 720 720 970 730 730 730 740
Diameter(mm) 340 410 480 550 630 740 800 880
Height(mm) 215 256 300 340 390 460 545
Rotate speed(r/min) 281 247 219 200 175 160 150 138
Circular velocity(m/s) 5 5.3 5.5 5.76 5.77 6.7 6.25 6.36
Loam board motor Model Y90S-4 Y90S-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4
Power(kw) 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5
Rotate speed(r/min) 1400 1400 1400 1400 1400 1400 1400 1400
Loam board Rotate speed(r/min) 18 18 16 16 16 16 16 16
Diameter(mm) 500 500 580 600 600 700 700 500
Wind pressure of fan(kpa) ≥12.6 ≥14.7 ≥19.8 ≥19.8 ≥21.6 ≥25.5 ≥30.4 ≥34.3
Max. air injection amount(m³/㎡·min) 2 2 2 2 2 2 2 2

 

Model XCF-1 XCF-2 XCF-3 XCF-4 XCF-8 XCF-16 XCF-24 XCF-38
Dimensions Length(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Width(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Height(mm) 1100 1250 1400 1500 1950 2400 10819 3400
Single Effective Weight(t) 1.2 1.7 2.3 2.7 3.9 6.6 8.0 16.8
Effective cubage(m³) 1 2 3 4 8 16 24 38
Production Capacity calculated by slurry volume(m³/min) 0.2—1 0.4—2 0.6—3 1.2—4 3—8 4—16 4—24 10—38
Main shaft motor Model Y132M2-6 Y160M-6 Y160L-6 Y180L-6 Y200L2-6 Y280S-8 Y280S-8 Y280S-6
Power(kw) 5.5 7.5 11 15 22 37 37 45
Impeller Rotate speed(r/min) 960 970 970 970 970 740 740 980
Diameter(mm) 400 460 540 620 720 860 950
Height(mm) 155 175 207 247 321 349
Rotate speed(r/min) 358 331 266 215 185 160 153
Circular velocity(m/s) 7.5 7.5 7.5 7 6.97 7.6 7.6 7.4
loam board motor Model Y90S-4 Y90S-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4
Power(kw) 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5
Rotate speed(r/min) 1400 1400 1400 1400 1400 1400 1400 1400
loam board Rotate speed(r/min) 18 18 16 16 16 16 16 16
Diameter(mm) 500 500 580 600 600 700 700 700
Wind pressure of fan (kpa) ≥12.6 ≥14.7 ≥19.8 ≥19.8 ≥21.6 ≥25.5 ≥30.4 ≥34.3
Max. air injection amount(m³/㎡·min) 2 2 2 2 2 2 2 2

Inquiry Us

If you have a question about our products, we'd like to hear from you.Rest assured we won't share your name, address or phone number with anyone. We're passionate about our company and want to help any way we can. Thanks for taking the time to get in touch with us.

Email:machine@hxjq.comTel:+86-371-67833171

Product:
*Name:
Phone:
*Email:
Message:
 

CONTACT US

Thank you for your attention. If there is any question, please contact us through the following ways.

  • E-mail:machine@hxjq.com
  • Tel:+86-371-67833171

ABOUT US

Henan Hongxing Mining Machinery Co., Ltd is a joint-stock mining machinery manufacturing enterprise integrated in scientific research, production and marketing.